Standing seam, exposed-fastener panels, custom-cut systems — installed by crews who've done hundreds of metal projects across North and Central Alabama. One of the last roofing decisions you'll ever have to make.
Get a Free Metal Roof EstimateMetal roofing isn't a one-size-fits-all product, and we don't treat it that way. Fortified Home Solutions installs three primary metal systems: standing seam (concealed fastener), exposed-fastener R-panel and corrugated systems, and custom-cut residential panels for complex roof lines and historic homes. Every job starts with an accurate field measurement and a material recommendation based on your roof pitch, structure, and budget — not whatever happens to be on the truck.
Standing seam is the gold standard for residential metal roofing. The panels interlock at the seams and the fasteners are completely hidden, which eliminates the #1 cause of metal roof leaks — screw holes. For homeowners who want 50+ years of performance and a clean architectural look, standing seam is the answer. Our crews are trained specifically on standing seam installation and we bring in a seamer machine to lock the panels on-site.
Exposed-fastener systems — Galvalume panels, 5-V crimp, R-panel — are the right choice for barns, workshops, agricultural buildings, porches, and budget-conscious reroof projects where longevity still matters but the premium look of standing seam isn't required. Properly installed with good-quality screws and butyl tape at penetrations, they perform extremely well for 30–40 years in Alabama's climate.
We also handle complete metal tear-off and replacements of worn-out older panel systems, rusted screws, oil-canning, and ridge cap failures. If another company installed your metal roof and it's leaking, we can diagnose it and fix it right.
Concealed fastener panels that lock together on-site. No exposed screws, no rubber gasket failures. The cleanest, longest-lasting residential metal system available.
R-panel, 5-V crimp, Galvalume corrugated — ideal for commercial buildings, barns, shops, and porches. Cost-effective and proven.
Complex roof lines, steep pitches, dormers, turrets — we custom-cut panels to fit. No gaps, no improvised solutions that leak in year three.
Leaking around screws, failed ridge caps, rusted panels, oil-canning — we diagnose metal roof problems other contractors can't figure out and fix them correctly.
A properly installed metal roof with a cool-roof coating reflects solar heat, reducing summer cooling loads in Alabama homes by up to 25%.
Metal systems meet or exceed Alabama's wind uplift requirements. Many standing seam systems are rated for 140+ mph wind — critical in tornado country.
Every application is different. Here's a plain-English breakdown of what each system is best for and what you should expect to pay:
| System | Best For | Lifespan | Fasteners |
|---|---|---|---|
| Standing Seam Most Popular | Residential homes, high-end residential, steep slopes | 50–70 years | Concealed — no exposed screws |
| R-Panel / PBR | Commercial buildings, workshops, agricultural | 30–45 years | Exposed screws with neoprene washers |
| 5-V Crimp | Historic homes, low slopes, porches | 30–40 years | Concealed clips or exposed screws |
| Corrugated | Barns, sheds, carports, accent panels | 25–40 years | Exposed screws |
Chris Brasfield has been building and running crews since 1987. Metal roofing has been a core part of Fortified's work for years — we're not learning on your house.
Every metal project starts with a detailed roof takeoff. We don't eyeball square footage — we measure every plane, valley, hip, and ridge so your order is right the first time.
We're licensed with the Alabama Home Builders Licensure Board. Metal roofing requires skilled crews and proper licensing — verify ours any time.
Our reputation is built job by job. We don't cut corners on flashing, ridge caps, or sealants because those are exactly where metal roofs fail five years in.
The #1 reason metal roofs leak early is bad flashing around chimneys, skylights, and wall transitions. We do it right — with step flashing, lead boots, and proper sealant schedules.
If something comes up six months after installation, call us. We stand behind our work and we're reachable. Not a 1-800 number. Chris or the team picks up.
We come out, walk the roof, assess your current structure, and take field measurements. We'll tell you what system fits your home, your roof pitch, and your goals — and give you an honest price.
We'll show you panel profiles, gauge options (29 ga. vs. 26 ga. vs. 24 ga.), and color charts. Standing seam comes in dozens of colors — we help you pick something that'll look great on your home for the next 50 years.
We handle any required permits. Materials are ordered to your specific measurements. We'll give you a project start date and stick to it as close as weather allows.
We remove the old roofing, inspect the decking for rot, soft spots, and improper fastening. Any deck issues get addressed before a single panel goes up.
We install synthetic underlayment, then run panels from eave to ridge. Flashing is cut and fitted at every penetration, wall tie-in, and valley. Ridge cap is installed last and sealed properly.
We haul off every bit of old material and debris. You do a walkthrough with us before we call it done. If anything isn't right, we fix it on the spot.
Get a free inspection and estimate from Alabama's experienced metal roofing team. We serve Cullman, Huntsville, Birmingham, Decatur, Gadsden, and all of North and Central Alabama.
Request Your Free Estimate →